8
8
Before using this appliance ensure that the voltage indicated
on the product corresponds with the main voltage in your
home, if you are in any doubt about your supply contact your
local electricity company. The flexible mains lead is supplied
connected to a B.S. 1363 fused plug having a fuse of 13 amp
capacity. Should this plug not fit the socket outlets in your
home, it should be cut off and replaced with a suitable plug,
following the procedure outlined below.
Note:
Such a plug cannot be used for any other appliance and
should therefore be properly disposed of and not left where
children might find it and plug it into a supply socket - with the
obvious consequent danger.
Please note:
We recommend the use of good quality plugs
and wall sockets that can be switched off when the machine
is not in use.
IMPORTANT:
The wires in the mains lead fitted to this
appliance are coloured in accordance with the following code:
GREEN AND YELLOW
EARTH
BLUE
NEUTRAL
BROWN LIVE
As the colours of the wires in the mains lead of this appliance
may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
- The wire which is coloured green and yellow must be
connected to the terminal in the plug which is marked with
the letter E or by the earth symbol
or coloured green
or green and yellow.
- The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.
- The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
When wiring the plug, ensure that all strands of wire are
securely retained in each terminal. Do not forget to tighten the
mains lead clamp on the plug. If your electricity supply point
has only two pin socket outlets, or if you are in doubt, consult a
qualified electrician.
Should the mains lead ever require replacement, it is essential
that this operation be carried out by a qualified electrician and
should only be replaced with a flexible cord of the same size.
After replacement of a fuse in the plug, the fuse cover must
be refitted. If the fuse cover is lost, the plug must not be used
until a replacement cover is obtained. The colour of the correct
replacement fuse cover is that of the coloured insert in the base
of the fuse recess or elsewhere on the plug. Always state this
colour when ordering a replacement fuse cover.
Only 13amp replacement fuses which are asta approved to B.S.
1362 should be fitted.
This appliance conforms to the Norms EN 55014 regarding the
suppression of radio interference.
Warning - this appliance must be earthed
ELECTRICAL REQUIREMENTS
Green and Yellow to Earth
13 amp Fuse
Brown to live
Cord Clamp
Blue to
neutral
