13
length of the time interval.
4. Turn the dial clockwise till you reach the desired ending
time for this program interval.
You will be able to choose any time intervals of minutes.
5. Press the dial to confirm the end of the time interval,
and the temperature light will start blinking to enable
you to set the next program interval.
Set the desired program intervals along the 24 hours till
23:45 to complete the daily timer program following
the same procedure described from points 3 to 5.
Example of display:
❶
❷
❺
❸
❹
How to display the daily timer program
You may need to check the settings of the daily timer pro-
gram.
1. From timer operation mode, press the timer button for
approx. 5 seconds.
2. The display will show
00:00
, the temperature indicator
light (T1=green or T2=red) and the clock icon blinking.
3. Turn the dial clockwise to display the daily timer pro-
gram from
00:00
till
23:45
.
4. Press the dial to exit.
Example of display:
❶
❸
❷
❹
Power level setting in timer operation mode
In timer operation mode, the unit works by default at max
power level. It is possible to change the power level as follows:
1. In timer operation mode, press the control dial and the
power level icon will blink.
2. Turn the dial to choose between
min
/
med
/
max
/
max+eco
.
3. Press the dial to confirm.
Example of display:
min
med
max
max + eco
❶
❸
❷
Please note:
If a procedure to modify or monitor the
unit settings is interrupted and no button is pressed for two
minutes, the settings shown on the display will not be main-
tained and the appliance will go back to the settings previ-
ously displayed.
