11
Selected power levels and working power levels
There are 3 power levels (min/med/max) as well as ECO
mode.
min
med
max
max + eco
Depending on the selected power level, the working power
level may be less or equal to the selected power level.
The working heating power is always shown by the unit’s
display by means of the thin bars below the selected power
level.
]
]
- If the current room temperature is much lower than the
selected temperature, the appliance will start to heat
the room as rapidly as possible at the selected power
level.
- If the current room temperature is close to the selected
temperature, the appliance will heat the room using a
heating power lower than the selected power level.
- When the selected temperature is reached, the unit
stops heating.
Example: Operation is started at room temperature 18°C, the
set temperature is 25 °C, and the selected power level is Max.
Example of display:
Room temperature 18°
Working power level: Max
Working power level: Min
Room temperature 24°
Room temperature 25°
The room temperature is
reached the appliance
stops heating
Room temperature 22°
Working power level: Med
❶
❸
❷
❹
Setting the power level
1. Press the dial twice during heating operation.
2. The power level will blink.
3. Choose one of the available power levels by turning the
dial.
4. Press the dial once to confirm.
Example of display:
❶
❸
❷
❹
Eco mode
When the eco mode is activated, the unit will automatically
select the most convenient working power level from Max
to Min, and will also control the set temperature in order to
achieve energy saving while guaranteeing optimum com-
fort.
Anti-frost function
This function is useful to prevent freezing.
To activate this function, in manual operation when tempera-
ture is set to 10°C turn the dial anticlockwise till the set point
5 is displayed and a will appear.
In this operation mode the working power can not be set.
The appliance will automatically set to Max power level.
If you turn the dial clockwise, you will restore the same power
setting as before being switched to anti-frost.
Selected power level
Working power level
