19
ELECTRONIC CLOCK
(fig. 11)
The programmer is equipped with an
electronic clock with lighted numbers
which indicates hours and minutes.
Upon immediate connection of the
oven or after a blackout, three zeros
will flash on the programmer panel.
To set the hour it is necessary to push
the
button and then the
or
button until you have set the exact
hour (fig. 11).
In another way push simultaneously
the
two buttons and at the
same time push the
or
button.
Nota:
The hour setting delete any
program.
A
U
T
O
ELECTRONIC TIMER
The timer program consists only of a
buzzer which may be set for a
maximum period of 23 hours and 59
minutes.
If the
AUTO
flashing push the
button.
To set the time, push the
button
and the
or
until you obtain the
desired time in the panel (fig. 13).
Having finished the setting, the clock
hour will appear on the panel and the
symbol will be lighted.
The countdown will start immediately
and may be seen at any moment on
the panel by simply pressing the button
.
At the end of the time, the
symbol
will be switched off and an intermittent
buzzer will go off; this can be stopped
by pressing one of any of the buttons.
SETTING THE FREQUENCY
OF THE AUDIBLE SIGNAL
The selection from 3 possibilities of
sound can be made by pressing the
button.
NORMAL COOKING
WITHOUT THE USE OF
THE PROGRAMMER
To manually use the oven, that is, without
the aid of the programmer, it is necessary
to cancel the flashing AUTO by pushing
the button
(AUTO will be switched off
and the symbol
will go on - Fig. 12).
Attention:
If the AUTO is steady lighted
(which means a cooking program has
already been inserted), by pushing the
button
you have the cancellation of
the program and the switching to
manual.
If the oven is switch on, you must switch
off manually.
Figure 12
Figure 13
