8
FASTENING THE INSTALLA-
TION BRACKETS
(Refer to Figures 5):
Each cooker top is provided with an
installation kit including brackets and
screws for fastening the top to fixture
panels from 2 to 4 cm thick.
– Turn the cooker top upside down and
fasten the brackets “
F
and
R
” to the
appropriate socket holes, without
tightening the screws “
B
” for the
moment.
– Make sure that the brackets are fas-
tened as shown in figure 5a, 5b and
5c.
FASTENING THE COOKER
TOP
(Refer to Figures 5)
:
– Insert the cooker top into the hole
and position it correctly.
– Adjust the position of the brackets “
F
and
R
” and tighten screws “
B
” to
block the cooker top firmly in position.
– With a sharp cutter or trimmer knife
trim the excess sealing material
around the edge of the cooker top.
Figure 5a
Figure 5b
Rear side
Figure 5c
Front side
20
mm min.
40
mm max.
B
seal A
F
F
F
R
R
20
mm min.
40
mm max.
B
seal C
seal A
R
FRONT
