DeLonghi DEP7410P, Инструкция по установке и обслуживанию, Страница: 48 / 52

44
ALERT CODES
ALERT CODE POSSIBLE CAUSES WHAT TO DO
A1
The oven has overheated. 1. Allow the oven to cool down.
2. Once the oven has cooled down
and the door has unlocked, the
alert code will disappear. You can
now use the oven again.
A2
Door lock error: the door
cannot be locked after you
have started a pyrolysis
cycle.
1. Turn the power to the oven off at
the wall and on again.
2. Wait approximately 10 seconds.
This is to allow the door lock to
return to its initial position.
3. Set the clock. See ‘Setting the
clock and first use’ for instructions.
4. Try starting a pyrolysis cycle again,
making sure that you close the door
firmly. See ‘Using the pyrolysis
cycle’.
A3
Door lock error: the door
cannot be unlocked after a
pyrolysis cycle has finished.
1. Turn the power to the oven off at
the wall and on again.
2. Try touching on the oven door to
help the door lock disengage.
3. If this doesn’t help and the
alert code reappears, call your
Authorised Repairer or Customer
Care.
F
+ number
Technical fault. 1. Note down the alert code.
2. Wait until the cooling fans have
stopped and the oven has
completely cooled down.
3. Turn the power to the oven off at
the wall.
4. Call your Authorised Repairer or
Customer Care with the alert code
information.