DeLonghi DEP7410P, Инструкция по установке и обслуживанию

Страница: 28 / 52

28
PYROLYSIS FUNCTION
GENERAL INFORMATION
■ In this function the residual cooking greases on the inside walls of the oven cavity
are pulverised by the high temperature. The fumes produced during this process are
filtered by a special catalyst in the upper part of the appliance.
■ Smells and fumes produced during pyrolysis are not a cause of alarm. Adequate
ventilation should however be provided in the room where the oven is installed, e.g.
by opening a window.
IMPORTANT: The health of some birds is extremely sensitive to the fumes given off
during the self-cleaning cycle. Exposure to the fumes may result in death to certain
birds. Always move birds to another closed and well ventilated room.
■ Do not wait for the oven to be very greasy before performing this cleaning. It should
not be performed after every cooking, either, but only when the level of dirt justifies it
(on average 1 – 2 times a month depending on oven use).
■
For safety reasons (high temperature of the oven cavity), when the pyrolysis
starts the oven is automatically locked by an electronic device. The door can
no longer be opened and is only unlocked at the end of the cleaning cycle or,
stopping the cycle, when the oven cavity has cooled to a temperature lower than
300 °C.
■ When the pyrolytic function starts an internal fan starts automatically to cool the oven
walls.
■ The procedures for starting, stopping and completing the pyrolysis cycle and dealing
with any problems are described in the following chapters:
• “HOW TO START THE PYROLYSIS CYCLE”
• “WHEN A PYROLYSIS CYCLE HAS FINISHED”
• “TO CANCEL A PYROLYSIS CYCLE”
■ Caution: During the pyrolytic cycle the accessible parts may become hot. Keep
children away.
IMPORTANT NOTES:
This is not a cooking function but is only used to clean the oven.
Before starting the pyrolytic cycle:
■ Take all the accessories out of the oven (baking/grill tray and shelves).
■ Clean any traces of liquid which have overflowed.
■ Close the oven door and make sure that it is closed properly.
If there are cracks or flaws on the oven door glass (inside/outside) or if the gaskets
are ruined or worn or if the door does not close perfectly, unplug the appliance
and contact the After-Sales Service Centre.