18
H o w t o d e h u m i d i f y
T
ank control system
This dehumidifier is fitted with a special device to ensure correct operation.
A red indicator light on the control panel comes on to warn the user when:
1. the tank is full . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
empty the tank
2. the tank is missing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
replace the tank
3. the tank is in the wrong position . . . . . . . . . . . . . . . . . . .
position the tank correctly
4. in continuous drain: the hose is obstructed or the difference in level is
too great . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
remove the obstruction.
Once the cause has been eliminated, the light goes out and the appliance resumes operation.
D
ehumidification light (some models only)
This switches on when the machine is dehumidifying. The light remains on only when the
appliance is effectively dehumidifying; if the humidity in the room is already low enough, the
light will be off.
D
ehumidification standby/low temperature operation light
The light switches on in the following two cases:
1) To signal a delay of around 3 minutes in the start-up of the appliance. This device protects
the compressor against too frequent starts and stops.
2) To signal low temperature operation. When the room temperature is too low, the electronic
low temperature operation device is activated. The device makes the appliance operate
by alternating dehumidification cycles and fan only cycles, thus avoiding the formation of
frost. For frequent use in cold environments, it is recommended to heat the room at the
same time, even slightly. This allows the dehumidifier to operate in conditions that ensure
better performance and faster dehumidification.