DeLonghi DE30W, Инструкция по установке и обслуживанию

Страница: 16 / 24

LIGHTING GAS BURNERS
(FITTED WITH SAFETY CUT-OFF VALVE)
In order to light the burner, you must:
1 – Turn the knob fig. 18 in anti-clockwise direction up to the maximum aperture,
push in and hold the knob; this will light the gas. If there is no mains electrical
supply, bring a lighted match close to the burner.
2 – Wait about ten seconds after the gaslights before releasing the knob (starting
time for the valve).
3 – Adjust the gas valve to the desired position.
If the burner flame should go out, the safety valve will automatically stop the gas
flow.
To re-light the burner, first turn the oven control knob to position l, wait for at least
1 minute and then repeat the lighting procedure.
If after relighting the burner, the flame is still abnormal, turn the burner off and
contact our Customer Service Centre to obtain the nearest authorized Delonghi Service
Agent.
GRILL FOR SMALL COOK-
WARE
(fig. 19)
DE320G model only
Put it on the semi-rapid burner (the
smallest) grid when small cookware is
being used to prevent the cookware
from tipping over.
Figure 19
16