23
ENGLISH
S e l e c t i n g t h e f u n c t i o n s
H
ow to dehumidify (dehumidification only function)
1) Plug the appliance into a power socket.
2) The display shows “- -“ to indicate that the appliance is in standby and therefore ready for
operation. If the message “Ft” is displayed, empty the tank or position it correctly.
3) Press the ON/OFF button.
4) Press the “mode” button and choose the dehumidification function (“ ” indicator light on).
The display shows the relative humidity set point.
5) Press the “+” or “-“ button to set the desired humidity (30% means a dry environment, 80%
a humid environment).
6) Press the “power level” button to select the desired dehumidification power level
(MIN/MAX).
7) Press the “ ” button to display, in sequence, the ambient relative humidity (“ ” indica-
tor light flashing) and the ambient temperature (“ ” indicator light flashing).
8) When the appliance reaches the humidity set point, it will stop and the periodical ventila-
tion function will start, so as to ensure a correct relative humidity reading. As soon as the
humidity increases above the set point, the appliance will automatically resume dehumidi-
fication operation.
H
ow to heat
1) Plug the appliance into a power socket.
2) The display shows “--“ to indicate that the appliance is in standby and therefore ready for
operation. If the message “FT” is displayed, empty the tank or position it correctly.
3) Press the ON/OFF button.
4) Press the “mode” button and choose the heating function (“ ” indicator light on). The
display shows the temperature set point.
5) Press the “+” or “-“ button to select the desired temperature.
6) Press the “ ” button to select the desired heating power level (MIN/MAX).
7) Press the “ ” button to display, in sequence, the ambient relative humidity (“ ” indica-
tor light flashing) and the ambient temperature (“ ” indicator light flashing).
8) When the appliance reaches the temperature set point, it will stop and the periodical ven-
tilation function will start, so as to ensure a correct temperature reading. As soon as the tem-
perature increases above the set point, the appliance will automatically resume heating
operation.
C
ombined operation, (dehumidification + heating )
1) Plug the appliance into a power socket.
2) The display shows “--“ to indicate that the appliance is in standby and therefore ready for
operation. If the message “Ft” is displayed, empty the tank or position it correctly.
3) Press the ON/OFF button.
4) Press the “
mode
” button and choose the COMBI function (“ ” + “ ” indicator light on).
The display shows the humidity set point set.
5) Press the “
+
” or “
-
“ button to select the desired humidity level.
5748011200DE350E/GB 21-01-2004 10:49 Pagina 23
