DeLonghi DDSE30, Инструкция по эксплуатации

Страница: 8 / 12

6
Control panel
on/Stand-by
Button
Laundry
Button
Dehumidifying
Button
timer Button Fan Button
Decrease
Button
Display
thermometer
/ Hygrometer
button
Increase
Button
Buttons description
”on/Stand-by” Button
this turns the appliance on / off.
Dehumidifying Button
this starts the dehumidifying mode.
Press the button repeatedly to select the desired dehumidi-
fying level (miN/meD/maX/auto).
Laundry Button
this starts the laundry mode.
Fan Button
this starts the fan mode. Press the button repeatedly
to select the desired level of ventilation (miN/meD/maX).
thermometer / Hygrometer Button
this temporarily displays the temperature and the level of hu-
midity detected in the room where the appliance is installed.
timer Button
this allows you to set the timer function to delay when the
appliance comes on or goes off.
Increase/Decrease Buttons
these allow you to set the percentage of humidity you wish
to achieve in the room, by increasing or decreasing it by 5%
at a time.
it is also possible to set the timer using these buttons.
from 0 to 10 h the time is adjusted by 30-minute increments,
and from 10 to 24 h the time is adjusted by 1-hour incre-
ments.
Description of the Display
the meanings of the codes or symbols which may appear on
the display:
Stand-by
this indicates that the appliance is in stand-by mode.
tank Alarm
if this symbol appears it means that the tank is full, absent or
incorrectly positioned.
this alarm continues until the tank is correctly positioned.
Defrost alarm
at low temperatures, the appliance frequently carries out de-
frost cycles. During defrost this symbol will appear.
Probe Alarm
this indicates a possible malfunction of the probes or that the
ambient humidity is too low to be detected.
Keyboard Lock
this symbol appears when the keyboard lock is enabled.
Notes: with the aim of saving energy, after the ap-
pliance has been in stand-by for a few minutes, the display
will go off.
en