Program
- This button allows you to program the coffee maker up to 24
hours before the desired brewing time. See the section on “Delaying the
Brewing Cycle” for proper use.
Press the Power Select Button once. The Auto Start Light will illuminate,
indicating that the coffee maker is waiting for the preset brew time to be
reached before it will begin the brewing cycle.
“On” Light
- This button indicates that power is going to the coffee maker,
and the coffee maker is in normal operating stage.
Note: If the “ON” Button is pressed once for AUTO before presetting
time with the PROGRAM button, brew select feature will NOT activate.
Auto Start Light
- This button indicates the coffee maker is in delayed
brewing cycle stage, awaiting preset brew time.
“On” Button
- This button controls three power modes: ON/OFF /AUTO.
The OFF mode does not have a light indicator. Press once for AUTO
setting, twice for ON, and a third time shuts the unit off.
HOW TO SET THE CLOCK
To set the correct time of day, first press the Hour Advance Button until the
correct hour has been reached. Then, press the Minute Advance Button until
the correct minutes have been reached. Use the AM/PM indicator on the left
side of the digital read out when setting the time.
HOW TO USE YOUR COFFEE MAKER
Clock/tlmer
Digital Display
Minute Advance
Hour Advance
Auto Light
"ON" Light
Brew Select Button
"ON" Button
PREPARING YOUR COFFEE MAKER FOR USE
NOTE: Unplugging the unit will reset the clock to 12:00.
Carefully unpack the coffee maker and remove all packaging materials.
C
Di
Before making coffee in your coffee maker, thoroughly clean the carafe,
carafe lid and filter basket with warm, soapy water. Rinse and dry. Do not
use harsh or abrasive cleaners.
lock/timer
gital Display
You may wipe the carafe plate with a clean, damp cloth. However, do not
immerse the coffee maker in water or other liquid.
DELAYING THE BREWING CYCLE
Prior to brewing your first pot of coffee, operate coffee maker once or
twice with water but without ground coffee or a paper filter. This will
remove any dust that may have settled inside the coffee maker, which
might affect the flavor of coffee.
To preset your coffee maker to brew at a later time first verity that the clock is
set to the correct time. See section on “How to Set the Clock”.
IMPORTANT: Use cold water for best results.
Press and hold the Program Button. While continuing to hold the Program
Button, press the Hour Advance Button until the desired brew time hour is
reached. Then press the Minute Advance Button until the desired minute has
been reached. The AM and PM indicators are on the left side of the digital
clock readout. Release the Brew Preset Button.
PREPARING COFFEE MAKER FOR BREWING COFFEE
Place your coffee maker on a flat, level surface away from any edge.
Plug the unit into a 120 volt 60 Hz AC only outlet.
