DeLonghi COM53 Series, Инструкция по эксплуатации

Страница: 13 / 34

14
PROBLEM POSSIBLE CAUSE SOLUTION
The espresso crema is too dark (delivered
from the spout too slowly) The pre-ground coffee is pressed down
too firmly Press the coffee down less firmly (fig.
17)
There is too much pre-ground coffee Reduce the quantity of pre-ground cof-
fee
The espresso boiler outlet is blocked Clean as described in the section “13.3
Cleaning the boiler outlet”.
The pre-ground coffee is too fine or damp Use pre-ground coffee for espresso cof-
fee makers only and make sure it is not
too damp
The wrong type of pre-ground coffee is
being used Use a different type of pre-ground coffee
The filter holder cannot be attached to
the appliance Too much coffee has been placed in the
filter Use the measuring scoop included and
make sure you are using the correct filter
for the type of preparation
No milk froth is formed when making
cappuccino Milk not cold enough Always use semi-skimmed milk at refri-
gerator temperature
Milk frother not clean Thoroughly clean the holes in the cap-
puccino maker, in particular those indi-
cated in fig. 26-28
Models with adjustable capuccino
sytem (COM532): The ring of capuccino
maker in not in the cappuccino position
Place the ring in the cappuccino position
The drip or espresso has an acid flavor Inadequate rinsing after descaling Rinse the appliance as described in the
section ““14.1 Descaling the espresso
coffee unit” or “14.2 Descaling the drip
coffee unit”
The drip coffee takes longer to percolate The drip coffee maker needs to be desca-
led Perform the descaling procedure as de-
scribed in the section “14.2 Descaling
the drip coffee unit”
Steam button double flashes Descaling is required for espresso
The steam button is blinking Descaling is in process
The BOLD LED is double flashing Descaling is required for the drip coffee
unit
BOLD led blinking Descaling is in process