DeLonghi CLIMAVENETA HED HCAT 0011 SE, Инструкция по установке и обслуживанию

Страница: 17 / 46

15
HED-HCAT SE FREE COOLING
ENGLISH
DESCRIPTION OF STANDARD UNIT
The air-cooled condenser units with axial-flow fans opera-
te with R407C refrigerant and are suitable for outdoor in-
stallation, for use with HED direct expansion terminals.
The units conform to the essential requisites established in
EC directive 89/392.
They are factory tested and on site installation is limited to
refrigerant and electrical connections.
Condensate pan (mod. 0011÷0061) and heat ex-
changer protection grill fitted as standard.
STRUCTURE
Panels and bed plate are made from cataphoretic coa-
ted galvanised steel to ensure total resistance to atmo-
spheric agents.
COMPRESSORS
Hermetic rotary scroll compressor with sump heater
and thermal cut-out.
CONDENSER
Made using copper tubes and aluminium fins with a high
exchange surface area. Connections with cocks and flared
fittings.
FANS
Statically and dynamically balanced low revolution external
impeller axial-flow fans.
Six-pole electric motor with built-in thermal cut-out.
Housed in aerodynamic draught tubes with accident pre-
vention grill. Device for operation according to outsi-
de air temperatures: continuous regulation of fan rota-
tion speed via temperature transducer.
REFRIGERANT CIRCUIT
The unit features a refrigerant circuit with the following
components: filter, liquid receiver, safety pressure switches
to control discharge and intake pressure. Unit supplied
complete with non-freezing oil and R407C refrigerant, fac-
tory tested.
POWER AND CONTROL ELECTRICAL PANEL
Power and control electrical panel constructed in accor-
dance with IEC 204-1/EN60204-1, complete with compres-
sor contactor, thermal overload switch and door lock sa-
fety device. Control via “HSA 2” control panel.
OPTIONAL ACCESSORIES
- Rubber vibration dampers.
- Wall mounting brackets.
- Condensate pan (mod. 0071).
The above accessories are optional. Consult the relative
documentation for assembly instructions and technical da-
ta.
A I
1
2
3
4
5
7
6
8
9
1 Finned coil
2 Electrical panel
3 High pressure switch
4 Liquid receiver
5 Liquid valve
6 Gas valve
7 Low pressure switch
8 Scroll compressor
9 Fan