Please read this instruction booklet
carefully before installing the
appliance and keep it handy for futu-
re consultation. In so doing you will
obtain the best result and maximum
safety in its use.
SAFETY INSTRUCTIONS
-
Do not immerse the appliance in water.
-
Do not operate the appliance without first
having water in the tank.
-
Do not fill the water tank with milk.
-
Be careful not to scald yourself with spouts of
water or vapour or by using the appliance
incorrectly and do not touch hot parts (water,
dispensing area in contact with the filter-hol-
der and filter).
-
Do not remove the filter-holder while
the appliance is under pressure or
dispensing.
-
Once the packaging has been removed,
check the appliance is in full working order.
If in doubt, do not use the appliance and
contact qualified service staff.
-
Packaging materials (plastic bags, foam poly-
styrene , etc.) should not be left within reach
of children as they could be a potential s o u r-
ce of danger.
-
This appliance is for domestic use only. Any
other use is to be considered improper and
therefore dangerous.
-
Do not touch the appliance when hands or
feet are wet or damp.
-
Do not allow children or irresponsible peo-
ple to operate the appliance.
-
Installation must be carried out according to
the manufacturer’s instructions.
-
The appliance’s power-cable must not be
replaced by the user as special rools are are-
quired in order to replace it. In the event of
damage to the cable, or if the cable needs
replacing, contact only the nearest after-sales
assistance centre authorised by the manufac-
turer.
-
Materials and objects that are to come into
contact with foodstuffs are in accordance
w it h wha t se t for th b y d irec t iv es EE C
89/109.
INSTALLATION
-
Position the appliance on a level surface
away from faucets and wash basins.
-
Make sure the power supply corresponds to
that specified on the appliance’s data plate.
Only connect the appliance to a power socket
which has a minimum load of 10A and
which is efficiently earthed.
-
In the event of the plug on the appliance,
have plug replaced with a suitable one, by
qualified professional staff.
-
The electrical safety of the appliance is ensu-
red only when the latter is properly connec-
ted to an efficient ground. If in doubt, ask a
qualified professional.
-
Do not install the appliance in rooms that
may reach temperatures of or below to 0°C
(as freezing may cause damage).
PREPARING ESPRESSO COFFEE
1 Remove the boiler cap by turning it anti-
c l o c k w i s e .
2 Using the carafe supplied (fig. 1) pour water
into the boiler (fig. 2) according to the
amounts shown in the table at the end of the
tex t.
Do not exceed the amounts
shown as this could cause the
appliance to malfunction.
While filling
the water tank make sure the ON/OFF switch
is in the OFF position.
3 Carefully close the boiler cap by turning it
clockwise.
4 Insert the filter into the filter-holder. (fig. 3).
5 Place the coffee evenly into the filter (fig. 4)
according to the amounts shown in the fol-
lowing table. It is important to use medium
ground coffee. (Avoid using too finely ground
coffee otherwise the filter could become
blocked, MOKA coffee is suitable).
6 Remove excess coffee from the filter-rim (fig.
5).
7 To attach the filter holder to the machine
place the bowl under the heater-faucet (fig.
6) and line up with the arrow marked on the
machine lid (fig. 7). At this point press the fil-
ter-holder upwards while at the same time
rotating it clockwise all the way. It does not
matter if the filter-holder’s handle is not cen-
trally aligned with the machine. It is impor-
tant that the bowl be firmy set in its housing.
5
5732101500 GB 9-06-2000 8:39 Pagina 5
