2
Important Information
Please read these instructions carefully and note any safe operational requirements, warnings & cautions. Use the product correctly and with
care for the purpose for which it is intended. Failure to do so may cause damage and/or personal injury and will invalidate the warranty. Keep
these instructions safe for future use.
Contents
About the Product
Height-adjustable desk with 0°-40° tilting oak effect desktop ideal for your office or home needs. Features digital control panel with four
programmable memory presets enabling you to reach your desired height with the push of a button. Features anti-collision for safety when used
around children. Includes handy storage drawer to store your office or home essentials. Single motor system ensures a fast and stable adjustment.
Features ultra-quiet operation with a sound level less than 50dB. Some simple assembly is required.
Specification
• Height range: 730-1230mm
• Tilt angle: 0 - 40°
•
Speed: 25mm/s
• Desktop dimensions 1200 x 600mm
•
Sound level <50dB
• Max. load capacity 50kg
•
Supply 230v
Safety Instructions
• ELECTRICAL SAFETY
• WARNING!
It is the user’s responsibility to check the following:
• Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs
and all electrical connections for wear and damage. Dellonda recommend that an
RCD
(Residual Current Device) is used
with all electrical products. You may obtain an
RCD
by contacting your local domestic stockist.
• Check all connections to ensure that they are secure.
•
Important:
Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with
the correct fuse - see fuse rating in these instructions.
•
DO NOT
pull or carry the appliance by the power cable.
• DO NOT
pull the plug from the socket by the cable.
•
DO NOT
use worn or damaged cables, plugs or connectors.
•
Ensure that any faulty item is repaired or replaced immediately by a qualified electrician.
•
This product is fitted with a
BS
1363/A 13 Amp 3 pin plug.
• If the cable or plug is damaged during use, switch off the electricity supply and remove from use.
• Replace a damaged plug with a
BS
1363/A 13 Amp 3 pin plug. If in doubt contact a qualified electrician.
• Class
II
products are wired with live (brown) and neutral (blue) only, and are marked with the Class
II
symbol.
A) Connect the BROWN
live wire to the live terminal ‘L’.
B) Connect the BLUE neutral wire to the
neutral terminal ‘N’.
C) Check that there are no bare wires and ensure that all wires are correctly connected.
• Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight.
•
DO NOT
connect either wire to the earth terminal.
•
Dellonda recommend that repairs are carried out by a qualified electrician.
Recommended
fuse rating:
13A
Adaptor
