5.9. DIAGRAM 2
Unscrew the switch button, fit battery, refit the switch button.
5.10.
I
nsert the pins of the base to the holes of lower support, press to secure the pins. Use 4 x M5X12 screws to secure the lower support
and base.
5.11.
I
nsert the pins of the control box assembly to the holes of upper support, press to secure the pins. Use 4 x 3/16” screws to secure the
upper support and control box assembly.
NOTE:
I
t is vital at this stage to ensure that the bottom plate (N) and the middle plate (J) are assembled correctly.
The wheels on the bottom plate (N) are the back of the unit and the magnetic catches on the middle plate
(J) for the door are on the front of the unit, these parts must be on OPPOSITE sides of the unit. This must be
correct at this stage to ensure the unit operates correctly.
AAA Battery
T
he ignition switch must have a AAA battery
inserted into it, Unscrew the collar of the switch and
insert a battery then re screw the switch head into
place (Fig.6).
U
nscrew the button collar until it comes away from the unit. (Fig. 6.1).
Fig. 6.1
Slide in a AAA battery and re-screw the button into position. (Fig. 6.2).
Fig. 6.2
Front of unit.
Back of unit.
Fig. 6
Original Language Version
D
G5, DG6 Issue:6 (3,4,5) 30/06/2021
