Dell XPS M1730 Скачать руководство пользователя страница 85

Страница: 85 / 88

Flashing the BIOS

Flashing the BIOS

If a BIOS-update program CD is provided with the new system board, flash

the BIOS from the CD. If you do not have a BIOS-update program CD, flash

the BIOS from the hard drive.

Flashing the BIOS From a CD

Ensure that the AC adapter is plugged in and that the main battery is

installed properly.

NOTE:

If you use a BIOS-update program CD to flash the BIOS, set up the computer

to boot from a CD before inserting the CD.

Insert the BIOS-update program CD, and restart the computer.
Follow the instructions that appear on the screen. The computer continues

to boot and updates the new BIOS. When the flash update is complete,

the computer will automatically reboot.

Press <F2> during POST to enter the system setup program.

Press <Alt> and <F> to reset the computer defaults.

Press <Esc>, select

Save changes and reboot

, and press <Enter> to save

configuration changes.

Remove the flash BIOS-update program CD from the drive and restart the

computer.

Flashing the BIOS From the Hard Drive

Ensure that the AC adapter is plugged in, the main battery is properly

installed, and a network cable is attached.

Turn on the computer.

Locate the latest BIOS update file for your computer at

support.dell.com

Click

Download Now

to download the file.

If the

Export Compliance Disclaimer

window appears, click

Yes, I Accept

this Agreement

Содержание XPS M1730

























































































Результаты поиска

Содержание XPS M1730

Отзывы:

Похожие инструкции для XPS M1730

Бренды по названию

Популярные бренды

Dell XPS M1730, Руководство по обслуживанию

Результаты поиска

Содержание XPS M1730

Отзывы:

Похожие инструкции для XPS M1730

Бренды по названию

Популярные бренды