Dell XPS M1730 Скачать руководство пользователя страница 77

Страница: 77 / 88

Video Card and System Board

CAUTION:

Before you begin any of the procedures in this section, follow the

safety instructions in the

Product Information Guide

NOTICE:

Handle components and cards by their edges, and avoid touching pins

and contacts.

Follow the instructions in "Before You Begin" on page 9.

Remove any installed ExpressCards from the ExpressCard slot.

Remove any installed memory modules or Mini Cards (see "Memory" on

page 19 and "Communication Cards" on page 31).

Remove the hard drive (see "Hard Drive" on page 15).

Remove the internal card with Bluetooth

wireless technology (see

"Internal Card With Bluetooth

Wireless Technology" on page 13).

Remove the display assembly (see "Display Assembly" on page 37).

Remove the palm rest (see "Palm Rest" on page 49).

Remove the optical drive (see "Optical Drive" on page 57).

Remove the ExpressCard cage (see "ExpressCard Reader" on page 59).

Remove the wireless sniffer board (see "Wireless Sniffer Board" on

page 55).

Remove the 8-in-1 memory card reader (see "Memory Card Reader" on

page 73).

Disconnect the fan connector from the system board.

Disconnect the speaker connectors from the system board.

Disconnect the card with Bluetooth

wireless technology connector from

the system board.

Disconnect the audio board connectors from the system board.

Remove the video card from the system board.

Remove the five screws that secure the system board to the computer base.

Lift the system board up vertically and out of the computer base.

Содержание XPS M1730

























































































Результаты поиска

Содержание XPS M1730

Отзывы:

Похожие инструкции для XPS M1730

Бренды по названию

Популярные бренды

Dell XPS M1730, Руководство по обслуживанию

Результаты поиска

Содержание XPS M1730

Отзывы:

Похожие инструкции для XPS M1730

Бренды по названию

Популярные бренды