Dell XPS 8940 Скачать руководство пользователя страница 34

Страница: 34 / 75

Removing the solid-state drive/Intel Optane

Prerequisites

NOTE:

You must disable the Intel Optane memory before removing Intel Optane from your computer. For more

information about disabling the Intel Optane memory, see

Disabling Intel Optane

1. Follow the procedure in

Before working inside your computer

2. Remove the

left-side cover

3. Remove the

graphics card

About this task

The following images indicate the location of the solid-state drive/Intel Optane and provide a visual representation of the removal
procedure.

Steps

1. Remove the screw (M2x2.5) that secures the solid-state drive/Intel Optane to the system board.
2. Slide and lift the solid-state drive/Intel Optane from the M.2 card slot on the system board.

Graphics card

Removing the graphics card

Prerequisites

1. Follow the procedure in

Before working inside your computer

2. Remove the

left-side cover

About this task

The following images indicate the location of the graphics card and provide a visual representation of the removal procedure.

Removing and installing components

Содержание XPS 8940












































































Результаты поиска

Содержание XPS 8940

Отзывы:

Dell XPS 8940, Руководство по обслуживанию, Страница: 34 / 75

Результаты поиска

Содержание XPS 8940

Отзывы: