Dell XPS 600, Руководство пользователя

Страница: 124 / 166

124
Removing and Installing Parts
www
.dell.com | support.dell.com
Battery
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide .
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity
from your body before you touch any of your computer’s electronic components. You can do so by
touching an unpainted metal surface on the computer chassis.
Replacing the Battery
A coin-cell battery maintains computer configuration, date, and time information. The battery
can last several years.
If you have to repeatedly reset time and date information after turning on the computer, replace
the battery.
CAUTION:
A new battery can explode if it is incorrectly installed. Replace the battery only with the
same or equivalent type recommended by the manufacturer. Discard used batteries according to the
manufacturer’s instructions.
To replace the battery:
1
Record all the screens in system setup (see "System Setup" on page 131) so that you can
restore the correct settings in step 8.
2
Follow the procedures in "Before You Begin" on page 69.
3
Locate the battery socket (see "System Board Components" on page 78).
NOTICE:
If you pry the battery out of its socket with a blunt object, be careful not to touch the system
board with the object. Ensure that the object is inserted between the battery and the socket before you
attempt to pry out the battery. Otherwise, you may damage the system board by prying off the socket or
by breaking circuit traces on the system board.
4
Remove the battery by prying it out of its socket with your
fingers.
5
Insert the new battery (CR2032) into the socket with the side
labeled "+" facing opposite the metal clip, and press the
battery into place.
6
Close the computer cover.