See the controller’s documentation for information about configuration settings.
3.
Check the configuration settings, make any necessary corrections, and restart the system.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or
as directed by the online or telephone service and support team. Damage due to servicing
that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
4.
Turn off the system and attached peripheral devices, and disconnect the system from its electrical
outlet.
5.
Remove the system-board assembly.
6.
Ensure that the controller card is firmly seated into the system board connector.
7.
If you have a battery-cached SAS RAID controller, ensure that the RAID battery is properly connected
and, if applicable, the memory module on the RAID card is properly seated.
8.
Ensure that the cables are firmly connected to the storage controller and the SAS backplane board.
9.
Install the system-board assembly.
10.
Reconnect the system to its electrical outlet, and turn on the system and attached peripheral devices.
If the problem persists, see
Troubleshooting expansion cards
NOTE: When troubleshooting an expansion card, see the documentation for your operating system
and the expansion card.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1.
Turn off the system and attached peripheral devices, and disconnect the system from the electrical
outlet.
2.
Remove the system-board assembly.
3.
Ensure that each expansion card is firmly seated in its connector.
4.
Install the system-board assembly.
5.
Reconnect the system to the electrical outlet, and turn on the system and attached peripheral
devices.
6.
If the problem is not resolved, see
.
Troubleshooting processors
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1.
Turn off the system and attached peripheral devices, and disconnect the system from the electrical
outlet.
2.
Remove the system-board assembly.
82
