Figure 32. Installing a memory module
1.
memory module
2. alignment key
3. memory module socket ejector (2)
1.
Install the cooling shroud.
2.
Install the system board assembly.
3.
Press F2 to enter
System Setup
, and check the
System Memory
setting.
4.
If the value is incorrect, one or more of the memory modules may not be installed properly. Ensure
that the memory modules are firmly seated in the sockets.
5.
Run the system memory test in the system diagnostics.
Related Links
Installing the cooling shroud
Installing the system board assembly
System battery
Replacing the system battery
WARNING: There is a danger of a new battery exploding if it is incorrectly installed. Replace the
battery only with the same or equivalent type recommended by the manufacturer. See your
safety information for additional information.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1.
Follow the safety guidelines listed in the Safety instructions section.
69
