manualshive.com logo in svg

Dell Vostro V13, Руководство по обслуживанию, Страница: 35 / 40

Поделиться
Скачать
Dell Vostro V13 Скачать руководство пользователя страница 35

Back to Contents Page

  

Subscriber Identity Module (SIM) Card 

Dell™ Vostro™ V13 Service Manual

 

Removing the SIM Card 

 

1.

Follow the procedures in 

Before Working Inside Your Computer

.  

2.

Remove the 

battery

.  

3.

Remove the 

LCD cover

.  

4.

Remove the 

keyboard

.  

5.

Slide the SIM card holder and lift it to release the the SIM card from the SIM card holder. 

  

6.

Remove the SIM card from the SIM card holder.

  

Replacing the SIM Card 

To replace the SIM card, perform the above steps in reverse order.  
 

Back to Contents Page

  

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

NOTE:

 You may need to install Adobe

® 

Flash

® 

Player from 

Adobe.com

 in order to view the illustrations below. 

Содержание Vostro V13









































Отзывы:

Нет отзывов