Back to Contents Page
ExpressCard/SD Card Reader
Dell™ Vostro™ V13 Service Manual
Removing the ExpressCard/SD Card Reader
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
ExpressCard
, if applicable.
3.
Remove the
SD card
, if applicable.
4.
Remove the
base cover
.
5.
Remove the
battery
.
6.
Remove the
hard drive and audio board
.
7.
Remove the
WLAN card
.
8.
Remove the
LCD cover
.
9.
Remove the
memory
.
10.
Remove the
keyboard
.
11.
Remove the screws that secure the card reader to the computer.
12.
Carefully turn over the computer.
13.
Lift the clip that secures the hard-drive data cable to the system board and disconnect it from its connector on the system board.
14.
Lift the card reader up and away from the computer.
Replacing the Card Reader
To replace the card reader, perform the above steps in reverse order.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe
®
Flash
®
Player from
Adobe.com
in order to view the illustrations below.
Содержание Vostro V13
Страница 32: ...Back to Contents Page ...