background image

Processor Configuration

Front USB Ports

Enable or disable the Front USB 
Ports.

Default: Enabled

Rear USB Ports

Enable or disable the Rear USB 
Ports.

Default: Enabled

Onboard Device Configuration

Onboard Audio Controller

Enable or disable the onboard 
audio controller.

Default: Enabled

SATA Mode

Displays the SATA Mode

Default: AHCI

Intel Multi-Display

Enable or disable the Intel Multi-
Display Technology.

Default: Disabled

Onboard LAN Controller

Enable or disable the onboard 
LAN controller.

Default: Enabled

Onboard LAN Boot ROM

Enable or disable the onboard 
LAN boot ROM.

Default: Disabled

Boot

Numlock Key

Enables of disables the numlock 

key during Boot.

Secure Boot Control

Enable or disable the Secure 

Boot Control.

Load Legacy OPROM

Enable or disable loading of a 

legacy OPROM

Keyboard Errors

Enable or disable displaying 

keyboard errors.

USB Boot Support

Enable or Disable USB Boot 

Support.

Boot Mode

Select the Boot mode.

1st Boot Device

Enable or disable the boot 

device.

2nd Boot Device

Enable or disable the boot 

device.

3rd Boot Device

Enable or disable the boot 

device.

4th Boot Device

Enable or disable the boot 

device.

5th Boot Device

Enable or disable the boot 

device.

Hard Disk Drivers

Display information about Hard 

Disk Drivers

Network Drivers

Displays information about 

Network Drives

35

Содержание Vostro V 3900










































Отзывы: