Dell Vostro 7590, Руководство по обслуживанию

Страница: 28 / 91

Steps
1 Align the notch on the solid-state drive module with the tab on the solid-state drive slot.
2 Slide the solid-state drive module firmly into the solid-state drive slot at an angle.
3 Replace the screw (M2x4) that secures the solid-state drive module to the system board.
Next step
1 Connect the battery cable .
2 Install the base cover .
3 Follow the procedure in After working inside your computer .
Hard drive
Removing the hard drive
Prerequisites
1 Follow the procedure in Before working inside your computer .
2 Remove the base cover .
3 Disconnect the battery cable .
About this task
The figure indicates the location of the hard drive and provides a visual representation of the removal procedure.
NOTE: The hard drive is available only in computers shipped with 3-cell battery.
28 Disassembly and reassembly