Dell Vostro 5301, Руководство по обслуживанию

Страница: 31 / 61

Steps
1. Place the display assembly on a clean surface.
2. Align and place the palm-rest and keyboard assembly at an angle with the display assembly.
3. Align the screw holes on the display hinges with the screw holes on the palm-rest and keyboard assembly.
4. Replace the screw (M2x2) that secures the right hinge to the system board and the palm-rest and keyboard assembly.
5. Replace the two screws (M2x2) that secure the left hinge to the palm-rest and keyboard assembly.
6. Lift the mylar that covers the display-cable connector on the system board.
7. Connect the display cable to the connector on the system board.
Next steps
1. Install the base cover .
2. Follow the procedure in After working inside your computer .
Touchpad
Removing the touchpad
Prerequisites
1. Follow the procedure in Before working inside your computer .
Disassembly and reassembly 31