Installing the power supply unit (PSU)
1
Insert the PSU into the PSU slot and slide it toward the back of the computer until it clicks into place.
2
Tighten the 6-32xL6.35 screws to secure the PSU to the computer.
3
Route the PSU cables through the retention tabs.
4
Connect the PSU cables to the connectors on the system board.
5
Close the front panel door.
6
Install the:
a
b
7
After working inside your computer
.
Power switch
Removing the power switch
1
Before working inside your computer
2
Remove the:
a
b
3
.
4
To remove the power switch:
a Disconnect the power switch cable from the system board [1].
b Press the release tabs [2] and slide the power switch out from the front of the computer [3].
NOTE:
It is recommended to move aside the power cables connected to the system board or disconnect the
power cables from the system board.
Removing and installing components
17
