NOTE:
The release tab is at the base of the expansion card.
Installing the PCIe expansion card
1
Pull the release latch backward to open.
2
Insert the PCIe expansion card to the connector on the system board.
3
Secure the PCIe expansion card by pushing the card retention latch until it clicks into place.
4
Close the release latch.
5
Close the front panel door.
6
Install the:
a
b
7
After working inside your computer
.
Power supply unit
Removing the power supply unit (PSU)
1
Before working inside your computer
2
Remove the:
a
b
3
.
4
To remove the PSU:
a Remove the 6-32xL6.35 screws that secure the PSU to the computer [1].
b Disconnect the PSU cables from the connectors on the system board [2, 3].
NOTE:
Push the tabs on the cables to release it from the connectors.
c Unroute the PSU cables from the retention clips.
d Press the metal release tab [4], slide the PSU toward the back and lift it out of the computer [5].
16
Removing and installing components
