Dell Vostro 3490 Скачать руководство пользователя страница 90 | Manualshive

Страница: 90 / 96

background image

Virtualization support

Option

Description

Virtualization

This field specifies whether a virtual Machine Monitor (VMM) can utilize the conditional hardware capabilities
provided by Intel Virtualization Technology.

Enable Intel Virtualization Technology—enabled by default.

VT for Direct I/O

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided
by Intel® Virtualization technology for direct I/O.

Enable VT for Direct I/O - enabled by default.

Trusted Execution

This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional hardware
capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization Technology, and the
Virtualization technology for direct I/O must be enabled to use this feature.

Trusted Execution - disabled by default.

Wireless

Option
Description

Wireless Switch

Allows to set the wireless devices that can be controlled by the wireless switch. The options are:

•

WLAN

•

Bluetooth

All the options are enabled by default.

NOTE:

For WLAN enable or disable controls are tied together and they cannot be enabled or

disabled independently.

Wireless Device
Enable

Allows you to enable or disable the internal wireless devices.

•

WLAN

•

Bluetooth

All the options are enabled by default.

Maintenance screen

Option

Description

Service Tag

Displays the Service Tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.

BIOS Downgrade

This controls flashing of the system firmware to previous revisions. Option 'Allow BIOS downgrade' is enabled by
default.

Data Wipe

This field allows users to erase the data securely from all internal storage devices. Option 'Wipe on Next boot' is
not enabled by default. The following is list of devices affected:

•

Internal SATA HDD/SSD

•

Internal M.2 SATA SDD

•

Internal M.2 PCIe SSD

•

Internal eMMC

BIOS Recovery

This field allows you to recover from certain corrupted BIOS conditions from a recover file on the user primary
hard drive or an external USB key.

•

BIOS Recovery from Hard Drive—enabled by default

•

Always perform integrity check—disabled by default

90

System setup

«
...
88
89
90
91
92
...
»

Содержание Vostro 3490

































































































Отзывы:

Нет отзывов

Похожие инструкции для Vostro 3490

Бренд: Hama Страницы: 22

Бренд: Clevo Страницы: 99

AMILO Xi Series

Бренд: Fujitsu Siemens Computers Страницы: 96

Бренд: ANSMANN Страницы: 10

Бренд: Toshiba Страницы: 8

R500 S5001X - Portege - Core 2 Duo 1.2 GHz

Бренд: Toshiba Страницы: 8

Бренд: Toshiba Страницы: 8

R400 S4832 - Portege - Core Duo 1.2 GHz

Бренд: Toshiba Страницы: 8

Бренд: Toshiba Страницы: 11

Бренд: Toshiba Страницы: 7

Бренд: Toshiba Страницы: 11

Бренд: Toshiba Страницы: 7

Бренд: Toshiba Страницы: 5

Бренд: Toshiba Страницы: 8

Бренд: Toshiba Страницы: 8

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды