Dell Vostro 3490 Скачать руководство пользователя страница 88

Страница: 88 / 96

Option

Description

Intel SpeedStep

Allows you to enable or disable the Intel SpeedStep mode of
processor.

•

Enable Intel SpeedStep

This option is set by default.

C-States Control

Allows you to enable or disable the additional processor sleep
states.

•

C states

This option is set by default.

Intel TurboBoost

Allows you to enable or disable the Intel TurboBoost mode of the
processor.

•

Enable Intel TurboBoost

This option is set by default.

Hyper-Thread Control

Allows you to enable or disable the HyperThreading in the
processor.

•

Disabled

•

Enabled

—Default

Power management

Option

Description

AC Behavior

Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected.

Default setting: Wake on AC is not selected.

Enable Intel Speed
Shift Technology

•

Enable Intel Speed Shift Technology

Default setting: Enabled

Auto On Time

Allows you to set the time at which the computer must turn on automatically. The options are:

•

Disabled

•

Every Day

•

Weekdays

•

Select Days

Default setting: Disabled

USB Wake
Support

Allows you to enable USB devices to wake the system from Standby.

NOTE:

This feature is only functional when the AC power adapter is connected. If the AC power

adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.

•

Enable USB Wake Support

Wake on WLAN

Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
LAN signal.

•

Disabled

•

WLAN

Default setting: Disabled

Peak Shift

This option enables you to minimize the AC power consumption during the peak power times of day. After you
enable this option, your system runs only in battery even if the AC is attached.

•

Enable peak shift—is disabled

System setup

Содержание Vostro 3490

































































































Результаты поиска

Содержание Vostro 3490

Отзывы:

Похожие инструкции для Vostro 3490

Бренды по названию

Популярные бренды

Dell Vostro 3490, Руководство по обслуживанию

Результаты поиска

Содержание Vostro 3490

Отзывы:

Похожие инструкции для Vostro 3490

Бренды по названию

Популярные бренды