Dell Vostro 3480 Скачать руководство пользователя страница 19

Страница: 19 / 93

Next steps

Replace the

SD memory card

Follow the procedure in

after working inside your computer

Battery

Lithium-ion battery precautions

CAUTION:

•

Exercise caution when handling Lithium-ion batteries.

•

Discharge the battery as much as possible before removing it from the system. This can be done by disconnecting the AC adapter

from the system to allow the battery to drain.

•

Do not crush, drop, mutilate, or penetrate the battery with foreign objects.

•

Do not expose the battery to high temperatures, or disassemble battery packs and cells.

•

Do not apply pressure to the surface of the battery.

•

Do not bend the battery.

•

Do not use tools of any kind to pry on or against the battery.

•

If a battery gets stuck in a device as a result of swelling, do not try to free it as puncturing, bending, or crushing a Lithium-ion

battery can be dangerous. In such an instance, the entire system should be replaced. Contact

https://www.dell.com/support

for

assistance and further instructions.

•

Always purchase genuine batteries from

https://www.dell.com

or authorized Dell partners and re-sellers.

Removing and installing components

Содержание Vostro 3480






























































































Результаты поиска

Содержание Vostro 3480

Отзывы:

Похожие инструкции для Vostro 3480

Бренды по названию

Популярные бренды

Dell Vostro 3480, Руководство по обслуживанию

Результаты поиска

Содержание Vostro 3480

Отзывы:

Похожие инструкции для Vostro 3480

Бренды по названию

Популярные бренды