Dell Vostro 3480 Скачать руководство пользователя страница 13

Страница: 13 / 93

Disabling Intel Optane memory

About this task

CAUTION:

After disabling Intel Optane memory, do not uninstall the driver for Intel Rapid Storage Technology as it will result in a

blue screen error. The Intel Rapid Storage Technology user interface can be removed without uninstalling the driver.

NOTE:

Disabling Intel Optane memory is required before removing the SATA storage device, accelerated by the Intel Optane

memory module, from the computer.

Steps

On the taskbar, click the search box, and then type

"Intel Rapid Storage Technology"

Click

Intel Rapid Storage Technology

. The

Intel Rapid Storage Technology

window is displayed.

On the

Intel Optane memory

tab, click

Disable

to disable the Intel Optane memory.

Click

Yes

if you accept the warning.

The disabling progress is displayed.

Click

Reboot

to complete disabling Intel Optane memory and restart your computer.

Technology and components

Содержание Vostro 3480






























































































Результаты поиска

Содержание Vostro 3480

Отзывы:

Похожие инструкции для Vostro 3480

Бренды по названию

Популярные бренды

Dell Vostro 3480, Руководство по обслуживанию

Результаты поиска

Содержание Vostro 3480

Отзывы:

Похожие инструкции для Vostro 3480

Бренды по названию

Популярные бренды