manualshive.com logo in svg

Dell Vostro 3252, Руководство пользователя, Страница: 10 / 33

Поделиться
Скачать
Dell Vostro 3252 Скачать руководство пользователя страница 10

Installing the Memory

1.

Align the notch on the memory card with the tab in the memory connector.

2.

Insert the memory module into the memory socket and press until it clicks into place

3.

Install the 

cover

.

4.

Follow the procedures in 

After Working Inside Your Computer

.

Removing the Coin-Cell Battery

1.

Follow the procedures in 

Before Working Inside Your Computer

.

2.

Remove the 

cover

.

3.

Press the release-latch and the coin-cell battery pops out. Lift the coin-cell battery out of the 

computer.

Installing the Coin-Cell Battery

1.

Place the coin-cell battery into its slot on the system board.

2.

Press the coin-cell battery downward until the release latch springs back into place and secures it.

3.

Install the 

cover

.

4.

Follow the procedures in 

After Working Inside Your Computer

.

Removing the Hard-Drive Assembly

1.

Follow the procedures in 

Before Working Inside Your Computer

.

2.

Remove:
a.

cover

b.

front bezel

3.

Disconnect the power and the data cables from the hard drive.

10

Содержание Vostro 3252


































Отзывы:

Нет отзывов