4.
Slide and lift the memory shield to remove it from the computer.
5.
Pry the retention clips away from the memory module until it pops-up. Lift and remove the memory
module from its connector.
Installing the Memory
NOTE: Please use DIMM 2 slot if there is only one memory module available.
1.
Align the notch on the memory-card with the tab in the system-board connector.
2.
Press down on the memory module until the release tabs spring back to secure them in place.
3.
Place the memory cage back into its place.
4.
Install:
a. back cover
b. stand
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the System-Board Shield
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the stand.
3.
Remove the back cover.
17
