Dell Vostro 270, Руководство пользователя

Страница: 44 / 51

Error Messages Description
drive. Run the Hard Disk Drive tests in the Dell
Diagnostics.
HARD-DISK DRIVE READ FAILURE The hard drive may be defective. Shut down the computer,
remove the hard drive, and boot the computer from a
optical. Then, shut down the computer, reinstall the hard
drive, and restart the computer. If the problem persists, try
another drive. Run the Hard Disk Drive tests in the Dell
Diagnostics.
INSERT BOOTABLE MEDIA The operating system is trying to boot to non-bootable
media, such as a floppy disk or optical drive. Insert
bootable media.
INVALID CONFIGURATION INFORMATION-PLEASE RUN
SYSTEM SETUP PROGRAM The system configuration information does not match the
hardware configuration. The message is most likely to
occur after a memory module is installed. Correct the
appropriate options in the system setup program.
KEYBOARD CLOCK LINE FAILURE For external keyboards, check the cable connection. Run
the Keyboard Controller test in the Dell Diagnostics.
KEYBOARD CONTROLLER FAILURE For external keyboards, check the cable connection.
Restart the computer, and avoid touching the keyboard or
the mouse during the boot routine. Run the Keyboard
Controller test in the Dell Diagnostics.
KEYBOARD DATA LINE FAILURE For external keyboards, check the cable connection. Run
theKeyboard Controller test in the Dell Diagnostics.
KEYBOARD STUCK KEY FAILURE For external keyboards or keypads, check the cable
connection. Restart the computer, and avoid touching the
keyboard or keys during the boot routine. Run the Stuck
Key test in the Dell Diagnostics.
LICENSED CONTENT IS NOT ACCESSIBLE IN
MEDIADIRECT Dell MediaDirect cannot verify the Digital Rights
Management (DRM) restrictions on the file, so the file
cannot be played.
MEMORY ADDRESS LINE FAILURE AT ADDRESS, READ
VALUE EXPECTING VALUE A memory module may be faulty or improperly seated.
Reinstall the memory modules and, if necessary, replace
them.
MEMORY ALLOCATION ERROR The software you are attempting to run is conflicting with
the operating system, another program, or a utility. Shut
down the computer, wait 30 seconds, and then restart it.
Try to run the program again. If the error message still
appears, see the software documentation.
MEMORY DOUBLE WORD LOGIC FAILURE AT ADDRESS,
READ VALUE EXPECTING VALUE A memory module may be faulty or improperly seated.
Reinstall the memory modules and, if necessary, replace
them.
44