Dell Vostro 15 3578 Скачать руководство пользователя страница 63

Страница: 63 / 83

Option

Description

TPM 2.0 Security

Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:

•

TPM On (enabled by default)

•

Clear

•

PPI Bypass for Enabled Commands

•

PPI Bypass for Disabled Commands

•

Attestation Enable (enabled by default)

•

Key Storage Enable (enabled by default)

•

SHA-256 (enabled by default)

•

Disabled

•

Enabled

NOTE:

To upgrade or downgrade TPM1.2/2.0, download the TPM wrapper tool

(software).

Computrace

Allows you to activate or disable the optional Computrace software The options are:

•

Deactivate

•

Disable

•

Activate

NOTE:

The Activate and Disable options will permanently activate or disable the

feature and no further changes will be allowed.

Default setting: Deactivate

CPU XD Support

Allows you to enable the Execute Disable mode of the processor.
Enable CPU XD Support (default)

Admin Setup Lockout

Allows you to prevent users from entering Setup when an Administrator password is set.
Default Setting: Enable Admin Setup Lockout is not selected.

Master Password Lockout

When enabled, this option will disable master password support.

•

Enable Master Password Lockout

Default setting: Enable Master Password Lockout is disabled

SMM Security Mitigation

This option enables or disables additional UEFI SMM Security Mitigation protections.

•

Enable Master Password Lockout

Default setting: SMM Security Mitigation is disabled

Table 10. Secure Boot

Option

Description

Secure Boot Enable

This option enables or disables the Secure Boot Feature.

•

Disabled

•

Enabled

Default Setting: The option is disabled.

Expert Key Management

Allows you to manipulate the security key databases only if the system is in Custom Mode. The

Enable Custom Mode

option is disabled by default. The options are:

•

System setup

Содержание Vostro 15 3578




















































































Результаты поиска

Содержание Vostro 15 3578

Отзывы:

Похожие инструкции для Vostro 15 3578

Бренды по названию

Популярные бренды

Dell Vostro 15 3578, Руководство пользователя

Результаты поиска

Содержание Vostro 15 3578

Отзывы:

Похожие инструкции для Vostro 15 3578

Бренды по названию

Популярные бренды