Dell Vostro 14-3478 Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 82

background image

Option

Description

•

Disabled: This option is enabled by default

•

LAN Only

Advanced Battery Charge
Configuration

Advanced Battery Charge maximizes battery health while still supporting heavy use during work
day.

Primary Battery Charge Configuration

Allows you to select the charging mode for the battery. The options are:

•

Adaptive

•

Standard — Fully charges your battery at a standard rate.

•

Primarily AC use

•

Custom

If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge
Stop.
Default Setting: The option

Adaptive

is enabled.

NOTE:

All charging mode may not be available for all the batteries. To enable this

option, disable the Advanced Battery Charge Configuration option.

Table 14. POST Behavior

Option

Description

Adapter Warnings

Allows you to enable or disable the system setup (BIOS) warning messages when you use
certain power adapters.
Default Setting: Enable Adapter Warnings

Fn Lock Option

Allows the hot key combination <Fn> +<Esc> toggle the primary behavior of F1–F12, between
the standard and secondary functions.

•

Lock Mode Disable/Standard.

•

Lock Mode Enable/Secondary. This option is enabled by default.

Fastboot

Allows you to speed up the boot process by bypassing some of the compatibility steps. The
options are:

•

Minimal

•

Thorough (default)

•

Auto

Extended BIOS POST Time

Allows you to create an additional preboot delay. The options are:

•

0 seconds. This option is enabled by default.

•

5 seconds

•

10 seconds

Full Screen Logo

This option will display full screen logo if your image match screen resolution.
Default Setting: Enable Full Screen Logo is disabled

Warnings and Logo

The Warning and Errors option cause the boot process to only pause when warnings or errors
are detected, rather than stop, prompt and wait for user input.

•

Prompt on Warnings and Errors (enabled).

•

Continue on Warnings

•

Continue on Warnings and Errors

System setup

65

«
...
63
64
65
66
67
...
»

Содержание Vostro 14-3478



















































































Отзывы:

Нет отзывов

Похожие инструкции для Vostro 14-3478

Бренд: Magicbook Страницы: 113

Бренд: Acer Страницы: 32

Бренд: Acer Страницы: 33

Бренд: Acer Страницы: 32

Бренд: Acer Страницы: 32

Бренд: Acer Страницы: 31

Бренд: Acer Страницы: 32

Бренд: Acer Страницы: 10

Aspire 4930 Series

Бренд: Acer Страницы: 15

Бренд: Acer Страницы: 12

Aspire 4810 Series

Бренд: Acer Страницы: 38

Бренд: Acer Страницы: 112

Бренд: Acer Страницы: 150

Aspire 4730ZG Series

Бренд: Acer Страницы: 186

Бренд: Acer Страницы: 215

Aspire 4930 Series

Бренд: Acer Страницы: 222

Бренд: Acer Страницы: 178

Бренд: Acer Страницы: 220

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды