d
e
5
Follow the procedure in
After working inside your computer
Installing the hard drive assembly
1
Insert the hard drive assembly into the slot on the computer.
2
Tighten the 4 (M2x3) screws to secure the hard drive assembly to the computer.
3
Connect the hard drive cable to the connector on the system board.
4
Install the:
a
b
c
d
5
Follow the procedures in
After working inside your computer.
Fingerprint reader
Removing the fingerprint reader
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
d
e
3
To remove the fingerprint reader bracket:
a Disconnect the fingerprint reader from the connector on the system board [1].
b Remove the tape that secures the fingerprint assembly to the computer [2]
c Remove the 1 (M2x2.5) screw that secures the fingerprint assembly to the computer [3].
d Lift the fingerprint reader bracket from the computer [4].
Removing and installing components
21
