Dell UltraSharp UP2720Q Скачать руководство пользователя страница 9

Страница: 9 / 87

About Your Monitor

│

Product Features

The

Dell UP2720Q

flat panel display has an active matrix, Thin-Film Transistor

(TFT), Liquid Crystal Display (LCD) and LED backlight. The monitor features
include:

• 68.47 cm (27 in.) viewable area display (measured diagonally).

3840 x 2160 (16:9) resolution, plus full-screen support for lower resolutions.

• Wide viewing angle to allow viewing from a sitting or standing position.

• Color gamut of CIE1931 Adobe 100% and CIE1976 DCI-P3 98% with an

average Delta E < 2.

• Supports HDMI, DP, and Thunderbolt™ 3 sources.

• HDMI, DP, and Thunderbolt™ 3 connection supports 10-bit color at 60 Hz.

• Single Thunderbolt™ 3 to supply power (Up to 90 W) to a compatible

notebook while receiving video & data signal.

• Built-in Color Calibration functionality.

• Multi-Stream Transport (MST) capability via Thunderbolt™ 3 connection.

• Tilt, swivel, pivot, and vertical extension adjustment capabilities.

• Ultra-thin bezel minimizes the bezel gap in multi-monitor usage, enabling

easier setup with an elegant viewing experience.

• Removable stand and Video Electronics Standards Association (VESA™)

100 mm mounting holes for flexible mounting solutions.

• Plug and play capability if supported by your system.

• On-Screen Display (OSD) adjustments for ease of set-up and screen

optimization.

• Supports Menu, Power buttons and Color lock via OSD.

• Security lock slot.

• 0.5 W standby power when in the sleep mode.

• Supports Picture by Picture (PBP) Select mode.

• Optimize eye comfort with a flicker-free screen.

Содержание UltraSharp UP2720Q
























































































Результаты поиска

Содержание UltraSharp UP2720Q

Отзывы:

Похожие инструкции для UltraSharp UP2720Q

Бренды по названию

Популярные бренды

Dell UltraSharp UP2720Q, Руководство пользователя

Результаты поиска

Содержание UltraSharp UP2720Q

Отзывы:

Похожие инструкции для UltraSharp UP2720Q

Бренды по названию

Популярные бренды