Troubleshooting
|
53
Built-in Diagnostics
Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality
you are experiencing is an inherent problem with your monitor, or with your computer and
video card.
NOTE:
You can run the built-in diagnostics only when the video cable is unplugged
and the monitor is in self-test mode.
3
4
5
1
2
To run the built-in diagnostics:
1
Make sure that the screen is clean (no dust particles on the surface of the screen).
2
Unplug the video cable(s) from the back of the computer or monitor. The monitor then
goes into the self-test mode.
3
Press and hold
Button 4
for 4 seconds in lock Select Option. Select the self-
inspection icon
and press
, A gray screen appears.
4
Carefully inspect the screen for abnormalities.
5
Press
Button 1
on the front panel again. The color of the screen changes to red.
6
Inspect the display for any abnormalities.
7
Repeat steps 5 and 6 to inspect the display in green, blue, black, white, and text
screens.
The test is complete when the text screen appears. To exit, press
Button 1
again.
If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the
monitor is functioning properly. Check the video card and computer.