5. Disassembly and Assembly Procedures
S10
Put the middle bezel with LED board on a cushion,
and then release the cable by tearing off the tapes.
Tear off 1pcs mylar tape on the LED board, then
release the LED board from the pins of the
middle
bezel.
Remove the two speakers U
. se a Philips-head
screwdriver to remove 21pcs screws for unlocking
the middle bezel, then disconnect the LED cable
away from the board, and then remove the bezel.
(No.1~21 Screw size= M3x5, Torque=5
±0.5
kgfxcm)
S8
1
4
16
14
15
3
6
10
11
12
20
19
18
21
5
6
2
7
8
9
13
17
Tear off 2pcs aluminum foil for releasing the panel
lamp cable, and then u
. U
to remove 2pcs screws for unlocking the
heat-sink with the board. Disconnect the lamp cable
away from the connector of the board.
se a Philips-head screwdriver
to remove 5pcs screws for unlocking the bracket
chassis module with the panel
se a Philips-head
screwdriver
(No.1~7 Screw size= M3x5, Torque=5
±
0.5
kgfxcm)
S9
S11
Lift up the bracket chassis, and tear of the tape and
disconnect the LVDS cable from the connector of the
T-CON board of panel module, then put the bracket
chassis on a protective cushion.
4
2
3
1
6
5
7
