background image

Operating 

the 

Monitor  |  

45

Menu

Select this option to adjust the settings of the OSD, such as, the 
languages of the OSD, the amount of time the menu remains on screen, 
and so on.

Language

Language

 options set the OSD display to one of the eight languages 

(English, Spanish, French, German, Brazilian Portuguese, Russian, 
Simplified Chinese or Japanese).

Rotation

Rotates the OSD by 90 degrees counter-clockwise. You can adjust the 
menu according to your 

Display Rotation

.

Transparency

Select this option to change the menu transparency by pressing the 

 and 

 buttons (Minimum: 0 ~ Maximum: 100).

 

Timer

OSD Hold Time

: sets the length of time the OSD will remain active after 

the last time you pressed a button.

Use 

 or 

 to adjust the slider in 1 second increments, from 5 to 

60 seconds.

Lock

Controls user access to adjustments. When 

Lock

 is selected, no user 

adjustments are allowed. All buttons are locked.

NOTE: 

Lock

 function – Either soft lock (through the OSD menu) or hard lock 

(press and hold the button beside the power button for 10 seconds)

Unlock

 function– Only hard unlock (press and hold the button beside 

the power button for 10 seconds)

Reset Menu 

Settings

Reset all OSD settings to the factory preset values.

Содержание U2415


































































Отзывы: