Dell Studio One 19/1909 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 53

background image

Great user manuals database on

UserManuals.info

Back to Contents Page

System Setup

Dell Studio One 19/1909 Service Manual

Clearing Forgotten Passwords

Clearing CMOS Settings

Flashing the BIOS

Overview

Use system setup to:

l

Change the system configuration information after you add, change, or remove any hardware in your computer

l

Set or change a user-selectable option such as the user password

l

Read the current amount of memory or set the type of hard drive installed

Entering System Setup

1.

Turn on (or restart) your computer.

2.

When the blue DELL™ logo is displayed, watch for the F2 prompt to appear and then press <F2> immediately.

System Setup Screens

The system setup screen displays current or changeable configuration information for your computer. Information on the screen is divided into three areas: the
options list, active options field, and key functions.

System Setup Options

CAUTION:

Unless you are an expert computer user, do not change the settings for this program. Certain changes can make your computer work

incorrectly.

NOTE:

Before you change system setup, it is recommended that you write down the system setup screen information for future reference.

NOTE:

The F2 prompt indicates that the keyboard has initialized. This prompt can appear very quickly, so you must watch for it to display, and

then press <F2>. If you press <F2> before you are prompted, this keystroke will be lost. If you wait too long and the operating system logo
appears, continue to wait until you see the Microsoft

®

Windows

®

desktop. Then, shut down your computer (see

Turning Off Your Computer

) and

try again.

Options List

—

This field appears on the left side of the system setup

window. The field is a scrollable list containing features that define the
configuration of your computer, including installed hardware, power
conservation, and security features.

Scroll up and down the list with the up- and down-arrow keys. As an option
is highlighted, the

Options Field

displays more information about that option

and the option's current and available settings.

Options Field

—

This field appears on the right side of the system setup

window and contains information about each option listed in the

Options List

.

In this field you can view information about your computer and make changes
to your current settings.

Press the up-arrow and down-arrow keys to highlight an option. Press
<Enter> to make that selection active and return to the

Options List

.

NOTE:

Not all settings listed in the Options Field are changeable.

Key Functions

—

This field appears below the

Options Field

and lists keys and their functions within the active system setup field.

NOTE:

Depending on your computer and installed devices, the items listed in this section may appear, or may not appear exactly as listed.

System Info

Bios Info

Displays the BIOS version number.

System

Displays the system name.

Service Tag

Displays the service tag of the computer.

Processor Type

Displays processor information

CPU Speed

Displays the processor speed.

Processor L1 Cache

Displays the processor L1 cache size.

«
...
42
43
44
45
46
...
»

Содержание Studio One 19/1909






















































Отзывы:

Нет отзывов

Похожие инструкции для Studio One 19/1909

Бренд: Acer Страницы: 17

Бренд: Acer Страницы: 19

Бренд: IBM Страницы: 120

Бренд: IBM Страницы: 155

Бренд: PROAIM Страницы: 3

Бренд: Quanmax Страницы: 37

Бренд: Alera Страницы: 12

Ultra Box nForce SLI Socket Barebone 939

Бренд: Ultra Products Страницы: 1

InBox300 Series

Бренд: InHand Страницы: 28

Бренд: AWOW Страницы: 4

Бренд: Lenovo Страницы: 4

Бренд: Lenovo Страницы: 52

Cassiopeia A-10

Бренд: Casio Страницы: 87

PCV-W700G - VAIO - 512 MB RAM

Бренд: Sony Страницы: 1

SVE11113FXW VAIO

Бренд: Sony Страницы: 2

PCV-W30 VAIO User Guide (primary manual)

Бренд: Sony Страницы: 1

PCV-V200G VAIO User Guide (primary manual)

Бренд: Sony Страницы: 1

PCV-RZ56G VAIO User Guide (primary manual)

Бренд: Sony Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды