Dell Studio One 19/1909 Скачать руководство пользователя страница 46

Страница: 46 / 53

Great user manuals database on

Hard Drive

—

The computer attempts to boot from the primary hard drive. If no operating system is on the drive, the computer generates an error

message.

CD/DVD Drive

—

The computer attempts to boot from the CD/DVD drive. If no CD/DVD is in the drive, or if the CD/DVD has no operating system, the

computer generates an error message.

USB Flash Device

—

Insert the memory device into a USB port and restart the computer. When

F12 = Boot Menu

appears in the upper-right corner of

the screen, press <F12>. The BIOS detects the device and adds the USB flash option to the boot menu.

Changing Boot Sequence for the Current Boot

You can use this feature to change the current boot sequence, for example, to boot from the CD/DVD drive to run the Dell Diagnostics on the

Drivers and

Utilities

media. On completion of diagnostic tests, the previous boot sequence is restored.

If you are booting to a USB device, connect the USB device to a USB connector.

Turn on (or restart) your computer.

When

F2 = Setup, F12 = Boot Menu

appears in the upper-right corner of the screen, press <F12>.

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop. Then shut down your
computer and try again.

The

Boot Device Menu

appears, listing all available boot devices. Each device has a number next to it.

On the

Boot Device Menu

choose the device you want to boot from.

For example, if you are booting to a USB memory key, highlight

USB Flash Device

and press <Enter>.

Changing Boot Sequence for Future Boots

Enter system setup (see

Entering System Setup

Use the arrow keys to highlight the

Boot Device Configuration

menu option and press <Enter> to access the menu.

Press the up- and down-arrow keys to move through the list of devices.

Press plus (+) or minus (

–

) to change the boot priority of the device.

Clearing Forgotten Passwords

Follow the procedures in

Before You Begin

Remove the computer cover (see

Removing the Computer Cover

Remove the shield (see

Removing the Shield

Remove the stand (see

Removing the Stand

Locate the 3-pin password connector (CLR_PSWD) on the system board (see

System Board Components

NOTE:

To boot to a USB device, the device must be bootable. To ensure that your device is bootable, check the device documentation.

NOTE:

To boot to a USB device, the device must be bootable. To ensure your device is bootable, check the device documentation.

NOTE:

Write down your current boot sequence in case you want to restore it.

WARNING:

Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.

WARNING:

The computer must be disconnected from the electrical outlet to clear the password setting.

Содержание Studio One 19/1909






















































Результаты поиска

Содержание Studio One 19/1909

Отзывы:

Похожие инструкции для Studio One 19/1909

Бренды по названию

Популярные бренды

Dell Studio One 19/1909, Руководство по обслуживанию

Результаты поиска

Содержание Studio One 19/1909

Отзывы:

Похожие инструкции для Studio One 19/1909

Бренды по названию

Популярные бренды