Great user manuals database on
10.
Lift the assembly away from the system board and place it in a secure location.
Replacing the System Fan and Heat Sink Assembly
1.
2.
To replace the system fan and heat sink assembly, connect the system fan cable to the connector (SYS_FAN1) on the system board.
3.
Tighten the two captive screws securing the heat sink to the system board.
4.
Replace the three screws securing the system fan to the system board.
5.
Replace the back I/O panel (see
6.
).
7.
Replace the shield (see
8.
Replace the computer cover (see
1
heat sink captive screws (2)
2
system fan screws (3)
3
system fan cable