D i s p l ay A s s e m bl y an d D i s pl ay L at c h
7
FILE LOCATION:
C:\webworks\projects\tangedoc\source\display.fm
DELL CONFIDENTIAL – PRELIMINARY 3/11/02
Removing the Display Bezel
NOTICE:
Disconnect the computer and any attached devices from electrical
outlets, and remove any installed battery.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
NOTICE:
Read "Preparing to Work Inside the Computer" before performing
the following procedure.
1
Remove the keyboard.
2
Remove the display assembly.
3
Use a plastic scribe to pry the five screw covers out of the screw holes
located on the front of the bezel.
4
Remove the five M2.5 x 5-mm screws located on the front of the bezel.
NOTICE:
Carefully separate the bezel from the top cover to avoid damage to
the bezel.
5
Starting at the bottom of the display panel (by the Dell™ logo), use
your fingers to separate the bezel from the top cover by lifting the
inside of the bezel while pushing in on the outside.
Removing the Display Panel
NOTICE:
Disconnect the computer and any attached devices from electrical
outlets, and remove any installed battery.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
NOTICE:
Read "Preparing to Work Inside the Computer" before performing
the following procedure.
1
Remove the keyboard.
1 screw covers (5)
6
M2 x 3-mm screws (4)
2 M2.5 x 5-mm screws (5)
7
M2.5 x 5-mm screw (1)
3 display bezel
8
display-feed flex cable
4 display panel
9
flex-cable retention
bracket
5 M2.5 x 5-mm screws (2)
10 top cover
tangdoc0.book Page 7 Monday, March 11, 2002 5:33 PM
