Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
270
On the right side of the screen,
Streaming Updates
indicates that changes to the status of customers are
dynamically updated. Click
ON/OFF
to enable/disable Streaming Updates, respectively.
Click
Logout
next to a meeting in the Meeting Info section to delete an upcoming meeting.
Secure Virtual Meeting > Settings
This section describes the
Secure Virtual Meeting > Settings
page and the configuration tasks available for
Virtual Meeting. The Virtual Meeting settings are divided into the following tabs:
•
•
General Settings
Use the General Settings page to configure general Virtual Meeting settings.
To configure Virtual Meeting general settings:
1 Navigate to the
Secure Virtual Meeting > Settings
page.
2 Select
Enable join without Invitation
to allow Participants to join the meeting without clicking the link
in the e-mail invitation. Participants run the Virtual Meeting client and join the meeting directly with a
meeting code set by the Coordinator.
3 Select
Allow starting meeting without meeting creator
to allow a meeting to start without the
Coordinator present. If enabled and a scheduled meeting has no Coordinator in the meeting room at the
scheduled start time, a participant is selected to become the Coordinator and begin the meeting. The
meeting ends if this check box is not selected and the Coordinator is not present at the start time.
4 In the
Meeting Waiting Message
field, type the message to be displayed to Participants in the lobby
waiting for the meeting to start. The lobby is a waiting room and meeting room, where you can initiate
virtual meeting functions like chats and email invites.
5 In the
Allow joining before start time
field, select the number of minutes that Participants are
allowed to join a meeting before it starts. Select 0 if Participants are allowed to join a meeting at any
