Dell S6100, Руководство по настройке

Страница: 193 / 1743

The software cannot count both packets and bytes; when you enter the
count byte
options, only bytes
increment.
Related Commands
• ip access-list standard — configure a standard ACL.
• permit — configure a permit filter.
ip access-list standard
Create a standard IP access list (IP ACL) to filter based on IP address.
Syntax ip access-list standard access-list-name
To delete an access list, use the
no ip access-list standard access-list-name
command.
Parameters
access-list-name Enter a string up to 140 characters long as the ACL name.
Defaults All IP access lists contain an implicit “deny any,” that is, if no match occurs, the packet is dropped.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.10.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.8.1.0 Increased the name string to accept up to 140 characters.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Added support for the non-contiguous mask and added the
monitor
option.
6.5.1.0 Expanded to include the optional QoS
order
priority for the ACL entry.
Usage Information
Dell Networking OS supports one ingress and one egress IP ACL per interface.
Access Control Lists (ACL) 193